Filter Products
Show:

Filter by price

21%
ST Link V2 Programmer For STM8 and STM32
Add to Wishlist
Add to Wishlist
Compare

ST Link V2 Programmer For STM8 and STM32

Original price was: ₹225.00.Current price is: ₹179.00. Add to cart
  • PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
  • Interface definition directly marked on the shell, clear, convenient and practical!
  • 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
  • Shell characters using laser engraving, never fade off! Permanent clarity!
  • 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
  • ST Link V2 Programmer For STM8 and STM32
Quick View
Add to Wishlist
Add to Wishlist
Compare
23%
Nano 328P Expansion Adapter Breakout Board IO Shield
Add to Wishlist
Add to Wishlist
Compare

Nano 328P Expansion Adapter Breakout Board IO Shield

Original price was: ₹89.00.Current price is: ₹69.00. Add to cart
  • Compatible with Arduino NANO
  • All digital and analog pins breakout
  • Compact size;
  • External power supply current support
  • Leads all pins out, convenient for wiring and doing experiments.
  • Nano 328P Expansion Adapter Breakout Board IO Shield
Quick View
Add to Wishlist
Add to Wishlist
Compare
14%
UNO Based ESP8266 Nodemcu Development Board
Add to Wishlist
Add to Wishlist
Compare

UNO Based ESP8266 Nodemcu Development Board

Original price was: ₹269.00.Current price is: ₹233.00. Add to cart
  • Based on ESP-8266EX.
  • Arduino compatible, using Arduino IDE to program.
  • Support OTA wireless upload.
  • Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
  • The direct use of Arduino IDE development, the same operation with Arduino UNO.
  • Operating Voltage: 3.3V
  • Digital I/O Pins: 11
  • Analog Input Pins: 1
  • oardUNO Based ESP8266 Nodemcu Development B
Quick View
Add to Wishlist
Add to Wishlist
Compare
38%
PICkit3 Debugger Programmer Emulator Controller Development Board
Add to Wishlist
Add to Wishlist
Compare

PICkit3 Debugger Programmer Emulator Controller Development Board

Original price was: ₹2,890.00.Current price is: ₹1,799.00. Add to cart
  • Full-speed USB support using Windows standard drivers
  • Real-time execution
  • Processors run at maximum speeds
  • Built-in over-voltage/short circuit monitor
  • Low voltage to 5V (1.8 to the 5V range)
  • Read/write program and data memory of the microcontroller
  • Program up to 512K byte flash.
  • PICkit3 Debugger Programmer Emulator Controller Development Board
Quick View
Add to Wishlist
Add to Wishlist
Compare
35%
STM32F103C6T6 Minimum System Board Microcomputer STM32 ARM Core Board
Add to Wishlist
Add to Wishlist
Compare

STM32F103C6T6 Minimum System Board Microcomputer STM32 ARM Core Board

Original price was: ₹241.00.Current price is: ₹159.00. Add to cart
  • 100% Brand new and high quality STM32 Board
  • Model: STM32F103C6T6.
  • Core: ARM 32 Cortex-M3 CPU.
  • Debug mode: SWD.
  • 72MHz work frequency.
  • 64K flash memory, 20K SRAM.
  • 2.0-3.6V power, I/O.
  • STM32F103C6T6 Minimum System Board Microcomputer STM32 ARM Core Board
Quick View
Add to Wishlist
Add to Wishlist
Compare
30%
Pro Mini – ATMEGA 328P – 5V 16Mhz – Compatible Board
Add to Wishlist
Add to Wishlist
Compare

Pro Mini – ATMEGA 328P – 5V 16Mhz – Compatible Board

Original price was: ₹299.00.Current price is: ₹210.00. Add to cart
  • Microcontroller: ATmega328P
  • Circuit Operating Voltage: 5V
  • Clock frequency: 16MHz.
  • 6 PWM port: D3, D5, D6, D9, D10, D11.
  • Use For Atmel Atmega328P-AU microcontroller.
  • Support serial download.
  • Support 9V battery.
  •  5V 16Mhz - Compatible Board.
  • Pro Mini - ATMEGA 328P - 5V 16Mhz - Compatible Board
Quick View
Add to Wishlist
Add to Wishlist
Compare
16%
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Add to Wishlist
Add to Wishlist
Compare

Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino

Original price was: ₹449.00.Current price is: ₹380.00. Add to cart
  • ATMEGA32U4 running in 5V / 16MHz
  • Support Arduino IDE V1.0.1
  • Micro USB interface programming on the board
  • Four 10-bit ADC pin
  • 12 digital I / O (5 PWM capability)
  • Rx and Tx hardware serial connection
  • Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Quick View
Add to Wishlist
Add to Wishlist
Compare
36%
MEGA 2560 R3 Improved Version CH340G Board
Add to Wishlist
Add to Wishlist
Compare

MEGA 2560 R3 Improved Version CH340G Board

Original price was: ₹1,399.00.Current price is: ₹899.00. Add to cart
  • Microcontroller CH340
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 54 (of which 15 provide PWM output)
  • Analog Input Pins 16
  • DC Current per I/O Pin 40 mA
  • Dimensions : 111 x 54 x 12 (LxWxH) mm.
  • MEGA 2560 R3 Improved Version CH340G Board
Quick View
Add to Wishlist
Add to Wishlist
Compare
24%
L293D Motor Driver/Servo Shield for Arduino
Add to Wishlist
Add to Wishlist
Compare

L293D Motor Driver/Servo Shield for Arduino

Original price was: ₹142.00.Current price is: ₹109.00. Add to cart
  • 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  • Can run motors on 4.5VDC to 25VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
  • L293D Motor Driver/Servo Shield for Arduino
Quick View
Add to Wishlist
Add to Wishlist
Compare
25%
ATTINY85 Mini USB Development Board
Add to Wishlist
Add to Wishlist
Compare

ATTINY85 Mini USB Development Board

Original price was: ₹278.00.Current price is: ₹210.00. Add to cart
  • ATTINY85 Mini USB Development Board
  • Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
  • Power via USB or External Source or 7-16 v to 5 v (automatic selection).
  • The Onboard, 150 ma 5 v Regulator.
  • Built-in USB and serial were debugging).
  • 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • 8 k Flash Memory (about 6 k after bootloader).
  • The I2C and SPI (vis USI).
  • The Power LED and the Test/Status LEDs.
Quick View
Add to Wishlist
Add to Wishlist
Compare
49%
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Soldered)
Add to Wishlist
Add to Wishlist
featuredCompare

Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Soldered)

Original price was: ₹310.00.Current price is: ₹159.00. Add to cart
  • Microcontroller                    
  •    Atmel ATmega328 SMD Package
  • Operating Voltage (logic level)  5 V
  • Input Voltage (recommended)  7-12V
  • Nano V3.0 Nano Arduino Compatible, ARM and Other MCU
Quick View
Add to Wishlist
Add to Wishlist
Compare
17%
UNO R3 SMD Atmega328PU Board
Add to Wishlist
Add to Wishlist
Compare

UNO R3 SMD Atmega328PU Board

Original price was: ₹300.00.Current price is: ₹249.00. Add to cart
  • Microcontroller : ATmega328 SMD.
    • Operating Voltage : 5V.
  • Supply Voltage recommended :  7-12V DC.
  • UNO R3 SMD Atmega328P Board CH340
Quick View
Add to Wishlist
Add to Wishlist
Compare

Filter Products

Filter by price

Recently Viewed Products

9%
2N3019 NPN Silicon Planar Transistor TO-39 Metal Package
Add to Wishlist
Add to Wishlist
Compare

2N3019 NPN Silicon Planar Transistor TO-39 Metal Package

Original price was: ₹130.00.Current price is: ₹119.00. Add to cart
• Metal TO-39 can package
• Advanced process technology
• Low error voltage
• Fast switching speed
• Full-voltage operation
• High power and current handling capability
2N3019 NPN Silicon Planar Transistor TO-39 Metal Package
Quick View
Add to Wishlist
Add to Wishlist
Compare
24%
82 ohm Resistor – 1/4 Watt (Pack Of 100)
Add to Wishlist
Add to Wishlist
Compare

82 ohm Resistor – 1/4 Watt (Pack Of 100)

Original price was: ₹51.00.Current price is: ₹39.00. Add to cart
  • Resistance value: 82 ohm
  • Power rating: 1/4 watt
  • Tolerance: 5% (typical)
  • Operating temperature range: -55°C to +155°C
  • 82 ohm Resistor - 1/4 Watt (Pack Of 100)
Quick View
Add to Wishlist
Add to Wishlist
Compare
51%
ROBO PLUS 12V 5A SMPS ADAPTER
Add to Wishlist
Add to Wishlist
Compare

ROBO PLUS 12V 5A SMPS ADAPTER

Original price was: ₹500.00.Current price is: ₹249.00. Add to cart
  • Provides a steady output voltage of 12 volts.
  • Capable of delivering a maximum current of 5 amperes (5A).
  • Suitable for powering a variety of devices requiring 12V input, such as routers, LED strips, and electronics projects.
  • 12V 5A SMPS ADAPTER
Quick View
Add to Wishlist
Add to Wishlist
Compare
21%
L296, 1-Channel, Step Down DC-DC Converter, Adjustable 15-Pin
Add to Wishlist
Add to Wishlist
Compare

L296, 1-Channel, Step Down DC-DC Converter, Adjustable 15-Pin

Original price was: ₹249.00.Current price is: ₹199.00. Add to cart
  • Input voltage range : 5.1V to 40V
  • Output voltage range : Adjustable from 5.1V to 40V
  • Output current : Up to 4A
  • Switching frequency : Up to 200KHz
  • Efficiency : Up to 90%
  • Package type : 15-lead Multiwatt® plastic power package
Quick View
Add to Wishlist
Add to Wishlist
Compare
43%
Robot Car Metal Chassis 4 Wheel Platform 200x105x50mm for DC Geared Motor
Add to Wishlist
Add to Wishlist
Compare

Robot Car Metal Chassis 4 Wheel Platform 200x105x50mm for DC Geared Motor

Original price was: ₹259.00.Current price is: ₹149.00. Add to cart
  • Size: Typically around 200mm (length) x 105mm (width) x 50mm (height).
  • Material: Made from metal, aluminum, or similar sturdy materials to ensure durability and rigidity.
  • Wheel Configuration: Equipped with four wheels, usually with rubber tires for better traction.
  • Compatibility: Designed to accommodate DC geared motors, allowing for motor installation and control.
  • Robot Car Metal Chassis 4 Wheel Platform 200x105x50mm for DC Geared Motor
Quick View
Add to Wishlist
Add to Wishlist
Compare
24%
Standard 60 Watt Corded Glue Gun
Add to Wishlist
Add to Wishlist
Compare

Standard 60 Watt Corded Glue Gun

Original price was: ₹259.00.Current price is: ₹199.00. Add to cart
  • Power: 60 watts
  • Cord Length: Standard cord length for convenient maneuverability
  • Compatibility: Compatible with standard 11mm glue sticks
  • Heating Element: Rapid heating element for quick startup
  • Trigger Feed: User-friendly trigger for easy adhesive application
  • Safety: Built-in safety stand to keep the nozzle elevated when not in use
  • Standard 60 Watt Corded Glue Gun
Quick View
Add to Wishlist
Add to Wishlist
Compare
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare

Select at least 2 products
to compare