RGBi Color Led – 5mm (Pack Of 5)

Description

• Size: The LEDs have a 5mm diameter, which is a common size for through-hole LEDs. This size makes them easy to mount on a printed circuit board (PCB).
• Bi-Color: The “Bi-Color” aspect indicates that this LED can emit two colors, typically red and green. By applying different voltage polarities or using specific control signals, you can switch between the two colors.
• Applications: Bi-Color LEDs are commonly used in various applications where you need to indicate two different states or conditions. They are often found in electronics, displays, indicators, control panels, and more.
• Voltage: To control the color of the LED, you typically need to apply different voltage polarities to its two leads (anodes or cathodes), depending on which color you want to illuminate. The specific voltage values will depend on the LED’s datasheet.
• Polarity Reversal: To change the LED’s color from red to green (or vice versa), you need to reverse the polarity of the applied voltage. For example, you might connect the anode to the positive terminal and the cathode to the negative terminal for one color, and then switch the connections for the other color.
• Current Limiting: It’s important to use appropriate current-limiting resistors when connecting these LEDs to prevent excessive current flow and potential damage. The resistor values will depend on the LED’s forward voltage and the desired current.